The split student table used in physics, chemistry, biology and other laboratories in primary and secondary schools is also known as the student laboratory table. The main colors are lake blue and bright yellow. 1. The color is active, with functional columns of the same color, and the style is consistent. 2. Diversified matching, two or four pieces can be spliced according to needs. 3. Diversified functions, both sides are equipped with power supplies to meet functional requirements. 4. For ground fixing, you can choose the foot to adjust the height, or you can fix it to the ground with pull-out screws.
SPECIFICATION 1. New plastic aluminum structure, overall 1200*600*780mm. The student seat is hollow, ergonomically designed, simple and beautiful, and all the places prone to collision are rounded. 2. The table top can be equipped with physical and chemical plates or ceramic plates. 3. Schoolbag bucket: The overall size is 400*260*100mm, and it is made of environmentally friendly ABS plastic engineering one-time injection molding. The bottom and face are added with warp and weft reinforcement ribs to prevent deformation and bending. The surface is rounded, simple and generous. A screw hole is injected in the center of the front end of the schoolbag bucket, and the schoolbag bucket is fixed to the middle beam by screws. It is detachable and easy to assemble. The concave round groove hanging stool slot is set in the middle to facilitate the storage and placement of laboratory stools, making the overall image of the laboratory more tidy and beautiful. 4. The side adopts a three-section high-strength aluminum alloy structure, with overall specifications of 562*770mm, of which the upper bracket size is 562*143*50mm, and the lower bracket size is 562*133*50mm. The column adopts an inclined design, with 20mm of upper and lower cast aluminum brackets embedded in it, and a reinforced support beam is equipped at the rear end. The upper and lower brackets on the side are formed by 4mm thick aluminum die-casting in one step. Special positioning parts are set for each part, and they are connected and fixed with high-strength hexagon socket screws 8*25, two on the upper and lower sides, which is convenient for assembly and disassembly. The streamlined design of the appearance is simple and beautiful, and all the places prone to collision are rounded. The product style requires the overall design to be beautiful, reasonable, safe, firm and durable. The die-cast aluminum parts of the upper and lower brackets are processed by rough grinding, fine grinding, fine grinding, polishing and smoothing. The metal surface is sprayed with high-gloss milky white epoxy resin outdoor powder and high-temperature curing to achieve strong load-bearing performance and acid, alkali and corrosion resistance. The upper bracket is designed with a power plug hole, and a special metal fixing slot is die-casted in the center of the upper bracket at one time. It is specially used with a national standard five-hole socket. The four card slots on the plastic shell of the socket core can be directly inserted into the upper bracket for fixing without screws or glue. The upper and lower brackets each have two wiring holes with a diameter of 16mm. The power core can be connected to the power supply in the column for power connection, which is convenient for wiring and routing to avoid wire exposure. There is also a plastic protective cover to cover and protect the power core to ensure the safety of electricity use. The socket core has been tested by an authoritative third-party testing agency and a national mandatory product certification test report has been issued. The lower bracket can be equipped with a foot to adjust the height of the table, or fixed to the ground through a special hole, and is equipped with a different color ABS foot cover decorative cover. 5. The column adopts a diamond octagonal structure design with a specification of 105*50mm and a thickness of 1.5mm. The vertical surface and the inclined surface each have four sides, the angle between the front vertical surface and the inclined surface is 19 degrees, and the angle between the side vertical surface and the inclined surface is 71 degrees. A groove is set in the middle of the facade of the column, which is more convenient and beautiful when connected with the middle beam. The groove edge banding is added to cover the screw holes, so that there are no visible screw holes on the side of the table, and the user is protected from the edge of the aluminum. The edge banding is sprayed with different colors to enrich the overall color matching of the table. 6. The front beam, middle beam, rear beam and middle and lower beams are all made of high-strength extruded aluminum alloy mold profiles. Special positioning parts are set for each part, and they are connected with high-strength hexagon socket screws, which are convenient for assembly and disassembly. The appearance is streamlined and simple and beautiful. The surface of the aluminum is treated with epoxy resin outdoor powder electrostatic spraying. It has strong load-bearing performance and is acid, alkali and corrosion resistant. The size of the middle beam is 37*28mm. A unique aluminum tear line is designed on the aluminum. After installing the middle beam, an empty groove can be torn out on the aluminum and the power cord can be placed in the groove to maximize the protection of students' electricity safety and make power wiring more convenient. The front and rear beams are 50*41mm in size, with a front semi-circular ergonomic design, an arc angle of R30, a thickness of 1.7mm at the installation screw, and 1.2mm at other thicknesses. The rear beam is equipped with a water retaining strip assembly slide to facilitate the installation of the water retaining strip. The size of the water retaining strip is 14*52mm. The size of the middle and lower beams is 100*19mm, with an upper and lower waist design to enhance the strength of the beam. 7. The back water retaining strip is extruded and formed by a mold, and different heights of embedded bayonet water retaining strips are provided according to the thickness of the table top. In addition, aluminum alloy water retaining blocks of corresponding sizes are provided to fix the aluminum alloy table corners and water retaining strips on both sides. The aluminum alloy water retaining block is die-casted by aluminum alloy, and the surface is electrostatically sprayed with epoxy resin outdoor powder. 8. Lower bracket foot: A circular hole with a diameter of 10mm is set at each end of the lower bracket foot, and the die-cast bracket is tapped. It can be fixed to the ground by pulling screws or used with an adjustment foot with a diameter of 50mm. The adjustment foot is made of 12×50 national standard screw and high-quality plastic injection molding, with strong load-bearing capacity. The side corners of the table are equipped with ABS foot cover decorative covers in different decorative colors. 9. The entire table has been tested by a national authoritative third-party testing agency. The metal surface coating is smooth and uniform, with consistent color, without defects such as sagging, lumps, wrinkles, and flying paint. The contact with the human body is smooth and burr-free; the mechanical properties of the table have been tested and meet the standard requirements of GB 24820-2009 "General Technical Conditions for Laboratory Furniture"; the aluminum alloy profiles used in the table have been tested, and the dimensional deviation, mechanical properties and chemical composition are in line with the standard requirements of GB/T 5237.4-2017 "Aluminum Alloy Building Profiles"; the Vickers hardness of the aluminum material reaches 77, the hydrochloric acid resistance test is qualified, and the solvent resistance test reaches level 4.
